Attributes
| Model | 4SF45ELS |
|---|---|
| Product Type | pump |
| Status | Obsolete |
Description
This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a brass manifolds, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. This is a hollow-shafted pump designed to bolt directly to a 184TC electric motor with a 1-1/8" shaft.
Specifications
| Max Flow | 4.5 gpm / 17 lpm |
|---|---|
| Max Pressure | 3500 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(M) |
| RPM | 1725 |
| Drive Type(s) | Direct |
| Material | Brass |
PDF Documents
4SF40ELS - 4SF50GS1 Data Sheet
Open PDF
2SF Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 055 - Removing Pump from Engine or Motor
Open PDF
Tech Bulletin 057 - Set Screw and Hardened Key
Open PDF
Tech Bulletin 065 - Higher Performance Ratings
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 075 - Sleeved Plunger Rod
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF