Attributes
| Model | 2565T13 |
|---|---|
| Product Type | pump |
| Max Psi | 3000 |
| Max Bar | 207 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a forged brass inlet manifold and a brass block-style discharge manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 13-tooth hollow spline shaft pairs with either 2 or 4-bolt SAE B hydraulic motors, significantly reducing the overall width of the assembled pump and motor compared to standard shaft configurations.
Specifications
| Max Flow | 20 gpm / 75.7 lpm |
|---|---|
| Max Pressure | 3000 |
| Inlet Port Size | 1 1/4" NPT(F) |
| Discharge Port Size | 3/4" NPT(F) |
| RPM | 1450 |
| Drive Type(s) | Direct |
| Material | Brass |
PDF Documents
2565T13 Data Sheet
Open PDF
2560, 2565 Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
2565T13 Sell Sheet
Open PDF