Attributes
| Model | 7CP6170G1 |
|---|---|
| Product Type | pump |
| Max Psi | 1800 |
| Max Bar | 124 |
| Shaft | 1" |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a forged brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
This pump comes complete with a gearbox attached for direct mounting to a gas engine with a 1" straight horizontal shaft.
Specifications
| Max Flow | 12 gpm / 45.4 lpm |
|---|---|
| Max Pressure | 1800 |
| Inlet Port Size | 3/4" NPT(F) |
| Discharge Port Size | 1/2" NPT(F) |
| RPM | 3264 |
| Drive Type(s) | Direct, Gearbox |
| Material | Brass |
PDF Documents
7CP6110CS, 7CP6110CSG1, 7CP6170, 7CP6170G1 Data Sheet
Open PDF
7CP Brass Plunger Pump Service Manual
Open PDF
Tech Bulletin 123 - Crankcase Threaded Side Holes
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 130 - Oil Level Inspection with Dipstick for Plunger Pump 7CP Series
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Tech Bulletin 129 - Replacement Pressure Washer Pumps
Open PDF