Attributes
| Model | 56HSG118 |
|---|---|
| Product Type | pump |
| Max Psi | 3000 |
| Max Bar | 207 |
| Shaft | 1 1/8" |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a forged brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. **High-strength 304 stainless steel and bronze plunger rods allow higher operating pressure on this "HS" Series pump.**
This pump comes complete with a gearbox attached for direct mounting to a gas engine with a 1-1/8" straight horizontal shaft.
Specifications
| Max Flow | 8 gpm / 30.3 lpm |
|---|---|
| Max Pressure | 3000 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 3600 |
| Drive Type(s) | Direct, Gearbox |
| Material | Brass |
PDF Documents
56, 56HS, 56G1, 56HS, 56HSG1, 56G118 Data Sheet
Open PDF
5-15 Frame Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 061 - Throttle Controller Installation & Adjustment
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
56HS Sell Sheet
Open PDF
New Pressure Washing Products Sell Sheet
Open PDF