Attributes
| Model | 3535.44101 |
|---|---|
| Product Type | pump |
| Max Psi | 1200 |
| Max Bar | 83 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated brass manifolds, 316 stainless steel valve assemblies, solid ceramic plungers, and **FPM seals and O-rings with specially blended PTFE high and low-pressure seals.**
We have designed our TEG pumps to handle Triethylene Glycol (TEG) up to 240°F (116°C). Our electric/engine-driven TEG pump product line has been field-proven in the most rigorous dehydration conditions and will meet Hazardous Air Pollutants (HAP) compliance and lower regulatory cost.
Specifications
| Max Flow | 36 gpm / 136.3 lpm |
|---|---|
| Max Pressure | 1200 |
| Inlet Port Size | 1 1/2" NPT(F) |
| Discharge Port Size | 1" NPT(F) |
| RPM | 800 |
| Drive Type(s) | Belt, Flexible Coupling and Bellhousing |
| Material | Brass |
PDF Documents
3531DHS.44101, 3535.44101, 3537HS.44101 Data Sheet
Open PDF
35 Frame Plunger Service Manual 2
Open PDF
Tech Bulletin 125 - 35 and 38 Frame Crankcase Changes
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 050 - Spacer w/Coil Springs
Open PDF
Tech Bulletin 069 - Extended Manifold Dimensions
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 108 - Spacer with Large Coil Spring
Open PDF
Tech Bulletin 109 - Discharge Manifolds for Plunger Pumps
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Triethylene Glycol Sell Sheet
Open PDF
Service Bulletin 001 - 35 and 38 Frame Plunger Pump Bell Housing Mounting
Open PDF