Attributes
| Model | 1051.44101 - ALT SPEC |
|---|---|
| Product Type | pump |
| Max Psi | 1800 |
| Max Bar | 124 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel manifold, 316 stainless steel valve assemblies, solid ceramic plungers, and **FPM seals and O-rings with specially blended PTFE high and low-pressure seals.**
We have designed our TEG pumps to handle Triethylene Glycol (TEG) up to 240°F (116°C). Our electric/engine-driven TEG pump product line has been field-proven in the most rigorous dehydration conditions and will meet Hazardous Air Pollutants (HAP) compliance and lower regulatory cost.
Specifications
| Max Flow | 12.3 gpm / 46.6 lpm |
|---|---|
| Max Pressure | 1800 |
| Inlet Port Size | 3/4" NPT(F) |
| Discharge Port Size | 1/2" NPT(F) |
| RPM | 1180 |
| Drive Type(s) | Belt, Clutch |
| Material | 316 Stainless Steel |
PDF Documents
1050.44101, 1051.44101, 1051C.44101 Data Sheet
Open PDF
5-15 Frame Plunger Service Manual
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 053 - Liquid Gasket for Seal and Valve Servicing
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 095 - Galling Prevention
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 128 - 15 and 18 Frame Crankcase With 8 Threaded Bearing Cover Holes
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Triethylene Glycol Sell Sheet
Open PDF