Attributes
| Model | 66DX30G1I |
|---|---|
| Product Type | pump |
| Max Psi | 4000 |
| Max Bar | 276 |
| Shaft | 1" |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
66DX Series pumps are hollow-shafted and bolt directly to a gas engine with a 1" straight horizontal shaft, providing an easy, compact installation.
Specifications
| Max Flow | 3 gpm / 11.4 lpm |
|---|---|
| Max Pressure | 4000 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(M) |
| RPM | 3400 |
| Drive Type(s) | Direct |
| Material | Brass |
PDF Documents
66DX30G1I - 35G1I - 40G1I Data Sheet
Open PDF
5DX-66DX Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 055 - Removing Pump from Engine or Motor
Open PDF
Tech Bulletin 061 - Throttle Controller Installation & Adjustment
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Tech Bulletin 129 - Replacement Pressure Washer Pumps
Open PDF
66DX Sell Sheet
Open PDF