Attributes
| Model | 2537 |
|---|---|
| Product Type | pump |
| Max Psi | 1200 |
| Max Bar | 83 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Specifications
| Max Flow | 25 gpm / 94.6 lpm |
|---|---|
| Max Pressure | 1200 |
| Inlet Port Size | 1 1/4" NPT(F) |
| Discharge Port Size | 3/4" NPT(F) |
| RPM | 1025 |
| Drive Type(s) | Belt, Clutch |
| Material | Nickel Aluminum Bronze |
PDF Documents
2530, 2530E, 2531, 2531C, 2537 Data Sheet
Open PDF
25 Frame Plunger Service Manual
Open PDF
Tech Bulletin 126 - 25 and 28 Frame Rear Cover Change
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 053 - Liquid Gasket for Seal and Valve Servicing
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 076 - Seat and O-ring
Open PDF
Tech Bulletin 081 - Seal Case and Wick
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 085 - M7 to M8 Keyway
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Tech Bulletin 135 - 25 Frame Crankcase With 8 Threaded Bearing Cover Holes
Open PDF