Attributes
| Model | 341 |
|---|---|
| Product Type | pump |
| Max Psi | 1800 |
| Max Bar | 124 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 1725 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
Specifications
| Max Flow | 4 gpm / 15.1 lpm |
|---|---|
| Max Pressure | 1800 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1725 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | 316 Stainless Steel |
PDF Documents
311, 311C, 317, 341, 341C, 347, 351, 351C, 357 Data Sheet
Open PDF
5-15 Frame Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 008 - Motor Pulley Selection
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 053 - Liquid Gasket for Seal and Valve Servicing
Open PDF
Tech Bulletin 054 - 2-Piece Seal Retainer
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 078 - 5CP to General/Interpump Retrofit Mounting
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 090 - Cover, O-ring, Crankcase Change
Open PDF
Tech Bulletin 095 - Galling Prevention
Open PDF
Tech Bulletin 105 - Seal Retainer Assemblies
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF