Attributes
| Model | 3545HS - ALT SPEC |
|---|---|
| Product Type | pump |
| Max Psi | 1500 |
| Max Bar | 103 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
**High-strength connecting rods and plunger rods allow high flow and operating pressure for intermittent use on this "HS" Series pump.** Intermittent use is defined as operating the pump at the maximum rated flow and pressure for no more than 50% of the time in any given hour.
Specifications
| Max Flow | 50 gpm / 189 lpm |
|---|---|
| Max Pressure | 1500 |
| Inlet Port Size | 1 1/2" NPT(F) |
| Discharge Port Size | 1" NPT(F) |
| RPM | 850 |
| Drive Type(s) | Belt, Flexible Coupling and Bellhousing |
| Material | Brass |
PDF Documents
3545HS, 3541DHS, 3541CHS, 3547HS Data Sheet
Open PDF
35 Frame Plunger Service Manual 2
Open PDF
Tech Bulletin 125 - 35 and 38 Frame Crankcase Changes
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 099 - Discharge Manifolds
Open PDF
Tech Bulletin 105 - Seal Retainer Assemblies
Open PDF
Tech Bulletin 107 - Spacer/Coil Spring Design Change
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF
Service Bulletin 001 - 35 and 38 Frame Plunger Pump Bell Housing Mounting
Open PDF
Service Bulletin 004 - 35 Frame Crankcase Oil Seal Replacement Tool Kit
Open PDF