Attributes
| Model | 530 |
|---|---|
| Product Type | pump |
| Max Psi | 2500 |
| Max Bar | 172 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a chrome-plated brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Specifications
| Max Flow | 5 gpm / 18.9 lpm |
|---|---|
| Max Pressure | 2500 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1100 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | Brass |
PDF Documents
530, 550 Data Sheet
Open PDF
5-15 Frame Plunger Service Manual
Open PDF
Tech Bulletin 123 - Crankcase Threaded Side Holes
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 008 - Motor Pulley Selection
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 027 - PVDF Spring Retainers
Open PDF
Tech Bulletin 032 - Shaft Extension and Manifold Port Dimensions
Open PDF
Tech Bulletin 035 - Servicing Crankcase Section - Roller Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 045 - 1-Piece Plunger Retainer w/Stud-SS
Open PDF
Tech Bulletin 048 - Extended Valve Plug
Open PDF
Tech Bulletin 051 - M8 to M10 Manifold and Crankcase
Open PDF
Tech Bulletin 054 - 2-Piece Seal Retainer
Open PDF
Tech Bulletin 067 - Brass to Stainless Plunger Retainer
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 105 - Seal Retainer Assemblies
Open PDF
Tech Bulletin 106 - Crankcase and Cover Change
Open PDF
Tech Bulletin 118 - Crankcase Paint Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF