Attributes
| Model | 350S |
|---|---|
| Product Type | pump |
| Max Psi | 1500 |
| Max Bar | 103 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a chrome-plated brass manifold with **304 stainless steel sleeve inserts**, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps "S" Series manifolds include precision press-fit 304 stainless steel sleeve inserts in the sealing areas and valve chambers of the manifold to help eliminate manifold washout and extend pump life.
The 1725 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
Specifications
| Max Flow | 5 gpm / 18.9 lpm |
|---|---|
| Max Pressure | 1500 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1725 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | Brass |
PDF Documents
310S, 340S, 350S Data Sheet
Open PDF
5-15 Frame Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 008 - Motor Pulley Selection
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 054 - 2-Piece Seal Retainer
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 078 - 5CP to General/Interpump Retrofit Mounting
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 090 - Cover, O-ring, Crankcase Change
Open PDF
Tech Bulletin 105 - Seal Retainer Assemblies
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF