Attributes
| Model | 240 |
|---|---|
| Product Type | pump |
| Max Psi | 1200 |
| Max Bar | 83 |
Description
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 1725 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
Specifications
| Max Flow | 3.6 gpm / 13.6 lpm |
|---|---|
| Max Pressure | 1200 |
| Inlet Port Size | 1/2" NPT(F) |
| Discharge Port Size | 3/8" NPT(F) |
| RPM | 1725 |
| Drive Type(s) | Belt, Clutch, Flexible Coupling and Bellhousing |
| Material | Brass |
PDF Documents
230, 240, 270 Data Sheet
Open PDF
3 Frame Plunger Service Manual
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 008 - Motor Pulley Selection
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 043 - Servicing the Low and High Pressure Seals
Open PDF
Tech Bulletin 067 - Brass to Stainless Plunger Retainer
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 104 - Crankcase and Cover Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF