Attributes
| Model | 821 |
|---|---|
| Product Type | pump |
| Max Psi | 1000 |
| Max Bar | 69 |
Description
This triplex (three piston rods) positive displacement, reciprocating piston pump is constructed with 316 stainless steel manifolds, 304 stainless steel valve assemblies, and un-chromed 304 stainless steel sleeves and cylinders. Multiple piston cup and seal configurations are available with NBR (Buna-N) O-rings.
The lower RPM belt drive design provides strong inlet suction and long-lasting pump and seal life.
Specifications
| Max Flow | 10 gpm / 37.9 lpm |
|---|---|
| Max Pressure | 1000 |
| Inlet Port Size | 1" NPT(F) |
| Discharge Port Size | 3/4" NPT(F) |
| RPM | 940 |
| Drive Type(s) | Belt |
| Material | 304 Stainless Steel |
PDF Documents
623, 621, 820, 821, 1010, 1011 Data Sheet
Open PDF
Piston Pump Service Manual
Open PDF
Tech Bulletin 001 - Long to Short Cylinder Change - Piston Pumps
Open PDF
Tech Bulletin 002 - Inlet Pressure vs. Water Temperature
Open PDF
Tech Bulletin 005 - 'B' Manifold and Stepped Seat
Open PDF
Tech Bulletin 008 - Motor Pulley Selection
Open PDF
Tech Bulletin 020 - Quiet Valves-Piston Pumps
Open PDF
Tech Bulletin 024 - Lubrication of Lo-Pressure Seals
Open PDF
Tech Bulletin 026 - Threaded Oil Gauge and C/C Cover
Open PDF
Tech Bulletin 034 - Servicing Crankcase Section - Ball Bearing Models
Open PDF
Tech Bulletin 036 - Identifying Your Pump
Open PDF
Tech Bulletin 038 - Blue Dot Seal and Wick-Piston Pumps
Open PDF
Tech Bulletin 042 - 10 Frame 4-Screw Crankcase Cover
Open PDF
Tech Bulletin 053 - Liquid Gasket for Seal and Valve Servicing
Open PDF
Tech Bulletin 074 - Torque Chart
Open PDF
Tech Bulletin 083 - Winterizing a Pump
Open PDF
Tech Bulletin 095 - Galling Prevention
Open PDF
Tech Bulletin 111 - Crankcase and Cover Change
Open PDF
Tech Bulletin 134 - Piston and Plunger Pump Crankcase Capacities
Open PDF